Users Guide

To congure SNMP alerts, perform the following steps:
1 From the main menu, select Application Settings > Alerts.
2 Click SNMP Conguration.
3 Select Enable to enable the conguration.
4 Enter the Destination Address.
You can congure up to four SNMP destinations.
5 Select the SNMP Version.
The available SNMP versions are:
• SNMP V1
• SNMP V2
NOTE: For MX9116n or MX5108n IOMs, only SNMP V2, is supported.
6 Enter the Community String.
When you congure the community string for SNMP V1, by default, the community string is appended with |common|FibreChannel11.
7 Select the Port Number and click Send to test the SNMP trap.
Conguring sys log alerts
You can congure up to four sys log destinations.
To congure system log alerts, perform the following steps:
1 Click Application Settings > Alerts > Syslog Conguration.
2 Select the Enabled check box corresponding to the required server.
3 Enter the destination address or the hostname.
4 Enter the port number.
38
Logging in to OME-Modular