Users Guide

Recommended physical topology
The recommended minimum design for a scalable fabric is two chassis with fabric A populated with redundant IOMs. Ideally, the two
chassis are located in separate racks on separate power circuits to provide the highest redundancy.
Additional chassis only have FEMs and the appear as the image below.
Table 4. Fabric topology
Chassis Slot Module
Chassis 1 A1 MX9116n FSE
A2 MX7116n FEM
Chassis 2 A1 MX7116n FEM
A2 MX9116n FSE
Chassis 3-10 A1 MX7116n FEM
A2 MX7116n FEM
You can also use Fabric B to create a second scalable fabric:
MX scalable fabric architecture
63