Users Guide

Network Trac Type Description QoS Setting
Cluster Interconnect Used for cluster heartbeat VLANs 5
Hypervisor Management Used for hypervisor management
connections such as the ESXi management
VLAN
5
Storage - iSCSI Used for iSCSI VLANs 5
Storage - FCoE Used for FCoE VLANs 5
Storage - Data Replication Used for VLANssupporting storage data
replication such as for VMware VSAN
5
VM Migration Used for VLANs supporting vMotion and
similar technologies
5
VMWare FT Logging Used for VLANs supporting VMware Fault
Tolerance
5
Dening networks
To congure a logical network:
1 Click Conguration > Networks.
The Networks page is displayed.
2 Click Dene.
The Dene Network window is displayed.
3 Enter the name, description, VLAN ID.
The format for a single VLAN ID is—123 while for an ID range, the format is—123-234.
4 Select the Network Type.
For more details, see SmartFabric VLAN management and automated QoSThe available options are:
• General Purpose (Bronze)
• General Purpose (Silver)
• General Purpose (Gold)
• General Purpose (Platinum)
• Cluster Interconnect
• Hypervisor Management
• Storage - iSCSI
• Storage - FCoE
• Storage - Data Replication
• VM Migration
• VMWare FT Logging
For more details, see SmartFabric VLAN management and automated QoS.
Editing networks
To edit a network:
1 On the Networks page, select the network that you want to edit, and click Edit.
The Edit Network window is displayed.
2 Make the required changes.
While editing the network, ensure that only one VLAN is congured in both the ports.
Managing networks
75