Owners Manual
Table Of Contents
- Dell EMC PowerEdge MX5016s and MX5000s Installation and Service Manual
- Contents
- About this document
- System overview
- Initial system setup and configuration for MX5016s
- Installing and removing system components
- Technical specifications
- System diagnostics and indicator codes
- Documentation resources
- Getting help
Table 15. Drive status LED indicator (continued)
Drive status LED indicators Condition
Blinking amber Indicates that a drive within the storage
sled has been marked as failed by the
disk controller on a mapped compute
sled.
Figure 26. Drive status LED indicator
Table 16. Drive status LED indicator
Drive status indicators Condition
Blinks green (On 250 ms Off 250 ms) Identifying drive or preparing for removal
Off Slot empty
Blinks green (500 ms), amber (500 ms), and turns off one
second
Predicted drive failure
Blinks amber (On 150 ms Off 150 ms) Drive failed
Blinks green (On 400 ms Off 100 ms) Drive rebuilding
Solid green Drive online
Blinks green three seconds, turns off three seconds,
blinks amber three seconds, and turns off three seconds
Drives rebuild aborted
System diagnostics and indicator codes 37