Owners Manual

Next steps

1. Install a sled or a sled blank.

Installing a compute or storage sled into the enclosure

Prerequisites

1. Follow the safety guidelines listed in Safety instructions.

2. Ensure that the sled release lever is in the open position.

Steps

1. Remove the I/O connector cover from the sled.

Figure 17. Removing the I/O cover

2. Hold and align the sled with the bay in the enclosure.

3. Push the sled into the bay in the enclosure.

NOTE: The procedure to install a single-width and double-width sled is the same.

4. Close the release lever to lock the sled in place.

Installing and removing system components