Administrator Guide

Table 73. Details of lclog (continued)
○ iDRAC_GUI
● -k—Filters the records based on the filter string provided in racadm lclog view command.
● -c — The category used to filter the records. Provides multiple categories using a "," as the delimiter.
The value is case-insensitive. Valid category values:
○ System
○ Storage
○ Worknotes
○ Config
○ Updates
○ Audit
● -b —The subcategory used to filter the records. Provides multiple subcategories using a "," as the
delimiter.
● -q—The sequence number from which the records must be displayed. Records older than this
sequence number is displayed.
NOTE: This parameter input is an integer. If an alphanumeric input is provided, then invalid
subcommand syntax error is displayed.
● -n—Specifies the n number of records that must be displayed. On Local RACADM, if this parameter is
not specified, by default 100 logs are retrieved.
● -r—Displays events that have occurred after this time. The time format is yyyy-mm-dd HH:MM:SS.
The time stamp must be provided within double quotation marks.
●
-e—Displays events that have occurred before this time. The time format is yyyy-mm-dd HH:MM:SS.
The time stamp must be provided within double quotation marks.
● -f <filename>—Specifies the file location and name where lifecycle log is exported.
● -a <name>—Specifies the FTP Server IP address or FQDN, user name, and password.
● -l <location>—Specifies the location of the network share or area on file system where lifecycle
log is exported. Two types of network shares are supported:
○ SMB-mounted path: //<ipaddress or domain name>/<share_name>/<path to
image>
○ NFS-mounted path: <ipaddress>:/<path to image>.
● -u <user>—Specifies the user name for accessing the FTP server, or Domain and user name for
accessing network share location.
● -p <password>—Specifies the password for accessing the FTP server or share location.
● -s—The severity used to filter the records. Provide multiple severities using a "," as the delimiter. The
value is case-insensitive. Valid Severity values:
○ Warning
○ Critical
○ Info
● —m <Comment> —User comment string for a record that must be inserted in the Lifecycle Controller
log. This comment string must be less than 128 characters. The text must be specified within double
quotation mark.
NOTE: HTML-specific characters may appear as escaped text.
● -m <Worknote>—Adds a worknote (an entry) in the Lifecycle log. This worknote must be less than
256 characters. The text must be specified within double quotation mark.
NOTE: HTML-specific characters may appear as escaped text.
NOTE: For -m <worknote> and —m <comment> options, you need test alert privilege.
● --complete—Export the complete Lifecycle log as a compressed file. The exported file is of the
type .xml.gz.
● -j<Job ID>—Specifies the Job ID.
Example
● Display the number of records present in the Lifecycle log.
racadm lclog view -i
98 RACADM Subcommand Details