Owners Manual

Figure 67. Installing the IDSDM card
Next steps
Follow the procedure listed in After working inside your sled.
Removing a MicroSD card
Prerequisites
1. Follow the safety guidelines listed in Safety Instructions.
2. Follow the procedure listed in Before working inside the sled.
3. Remove the IDSDM card.
Steps
1. Locate the MicroSD card slot on the IDSDM card.
NOTE: To locate IDSDM slot on the system board, see the system board jumpers and connectors.
2. Press the card to partially release from the slot.
3. Hold the MicroSD card and remove it from the slot.
NOTE: Temporarily label each MicroSD card with the corresponding slot number after removal.
Installing and removing system components 69