Owners Manual

Figure 75. Installing the Mezzanine card

Next steps

1. Follow the procedure listed in After working inside your sled on page 17.

Removing the mini Mezzanine card

Prerequisites

CAUTION:

To ensure proper system cooling, mini Mezzanine blank must be installed in the mini Mezzanine

socket.

NOTE: The removal of the blank is recommended only if you intend to install a mini Mezzanine card in this socket.

1. Follow the safety guidelines listed in Safety Instructions.

2. Follow the procedure listed in Before working inside the sled.

NOTE: MX740c supports HBA330 MMZ and Fiber channel MMZ which is installed in mini Mezzanine slot.

Steps

1. Pull the blue pull tag to raise the lever up of the mini Mezzanine card.

2. Holding the lever and the edge of the mini Mezzanine card, lift the mini Mezzanine card from the system.

Installing and removing system components