Users Guide

Recommended Action : Do one of the following: 1) Power off the server. 2) Disconnect the input power, wait for 30
seconds, and then reconnect to the power source. 3) Power on the server. 4) If the issue persists, contact your service
provider.
● PWR2281 : Unable to perform the memory arming operation because the PSU configuration of the server is insufficient to
guarantee data flush time in the event of power loss.
Recommended Action : Do the following and retry the operation:
○ Turn off the server.
○ Ensure the PSUs are installed as recommended in the user guide.
○ Turn on the server.
For more information on supported PSUs, see the Installation and Service Manual of the system available on the support site.
24 DCPMM event reporting