Users Guide

Figure 14. Sanitize
Sanitize can take up to 15 minutes with fully loaded 128 GB DIMM configuration, 30 minutes with 256 GB and 1 hour with 512
GB.
NOTE: Sanitize is not supported when DCPMMs are configured in Memory mode. When the Sanitize operation is running, a
prompt appears in BIOS indicating an Overwrite. Overwrite is the name for the second firmware command that is
conducted. The first command which happens quickly and will not be displayed on-screen is the Crypto Erase (firmware
command name is "Secure Erase").
DCPMM security 31