Users Guide

Remove PMem disks
Figure 19. Remove PMem disks
Windows 2019 does not support redundant volume creation on PMem disks by using Windows VDS (Virtual disk service).
In order to create redundant volumes, use the storage spaces method.
For information about storage spaces method refer to: https://docs.microsoft.com/en-us/windows-server/storage/storage-
spaces/deploy-standalone-storage-spaces.
PMem disk with interleave sets
Interleaved sets can often be created to make multiple persistent memory devices be displayed as a single logical disk to
windows server. For PMem Disk with the interleave set, "App-direct Interleave" should be selected during goal configuration.
PMem disk creation with interleave sets
When Interleave set is enabled, BIOS assigns single Region Id for PMems connected to the same processor.
Figure 20. PMem Disk creation with interleave sets
In above example two Interleave sets have been created, one Interleave set using slots A7, A8 and another Interleave set using
B7, B8.
We can create PMem Disk also using Region id.
Windows
37