Reference Guide

62 Dell EMC PowerEdge MX SmartFabric Deployment Guide
9.5 Verify configuration
This section covers methods to verify the SmartFabric and ACI environment is configured properly.
9.5.1 Validation using the OME-M Console
9.5.1.1 Show the MCM group topology
The OME-M console can be used to show the physical cabling of the SmartFabric.
1. Open the OME-M console and click Home.
2. In the chassis group pane, click View Topology.
3. Click the lead chassis image and then click Show Cabling.
4. Click the icons to view cable connections as shown in Figure 45.
SmartFabric cabling