Users Guide

31 Dell EMC PowerEdge MX SmartFabric Configuration Guide with Cisco ACI
Create Subnet
7. Click OK, Next and then click Finish.
8. Repeat the steps in this section as needed for each VLAN. Note that the additional bridge
domains created in this example are appBD1, dbBD1, ESXiMgmtBD1, vMotionBD1, and
vSANBD1.
4.2.14 Create an Application Profile
1. Go to Tenants > Customer-TN1 > Application Profiles.
2. Right-click on Application Profiles and select Create Application Profile.
3. In the Name field, enter ap1.
4. Click Submit.