Users Guide

33 Dell EMC PowerEdge MX SmartFabric Configuration Guide with Cisco ACI
Create Application EPG
6. Create a separate EPG for each of the remaining bridge domains using the EPG names provided
in Table 3: appEPG1, dbEPG1, ESXiMgmtEPG1, vMotionEPG1, and vSANEPG1.
4.2.16 Configure the Access Entity Profile with EPGs and VLANs
Note: Refer to Table 3 for the necessary information.
1. Go to Fabric > Access policies > Policies > Global > Attachable Access Entity Profiles.
2. Form the profiles listed, select AEP1 (created above in step 4.2.3).