Users Guide

40 Dell EMC PowerEdge MX SmartFabric Configuration Guide with Cisco ACI
4.2.19 Create a Contract
Contract provides a way to control traffic flow within the ACI fabric between EPGs. To create Contract,
perform the following steps:
1. Go to Tenants > Customer-TN1 > Contracts > Standard.
2. Right-click Standard and select Create Contract.
3. In the Name field, enter AllowAllContract1.
Create Contract
4. In the Subjects field, click the Add(+) icon.
5. In the Name field, enter AllowAllSub1.
6. In the Filters field, click the Add(+) icon.
7. Under filter Name, select AllowAllFilter1 (created above in step 4.2.18).