Users Guide

49 Dell EMC PowerEdge MX SmartFabric Configuration Guide with Cisco ACI
A VDS named VDS-Mgmt, along with six distributed port groups, one for each VLAN, are used as shown in
Figure 43.
VDS and port groups used in the validated environment
Note: For each port group in the VDS in this example, both uplinks are active and the load balancing method
used is Route based on physical NIC load as recommended in VMware Validated Design Documentation.
Detailed vCenter configuration is beyond the scope of this document.
For more information on vCenter configuration, see the VMware vSphere Documentation.