Users Guide

53 Dell EMC PowerEdge MX SmartFabric Configuration Guide with Cisco ACI
The Group Topology page shows the MX9116n FSE and MX7116n FEM connections and displays any
validation errors. On the MX9116n FSEs, ports 1/1/17-18 are used to connect to the MX7116n FEMs. Ports
1/1/37-40 are used for the VLTi.
5.1.2 Show the SmartFabric status
The overall health of the SmartFabric is displayed as follows:
1. Open the OME-M console.
2. From the Navigation menu, click Devices and then click Fabric.
3. Click the fabric name, for example, SmartFabric1, to expand the details of the fabric.
The overall status of the fabric is in the upper left corner of the page as shown in Figure 46.
Fabric status details
The left pane of the Overview tab lists Uplinks, Switches, Servers, and ISL Links. Click the Switches link
to view the switch health status as shown in Figure 47.
SmartFabric switch status
Click the Servers link to view the server health status as shown in Figure 48.