Users Guide

Tighten the screw to secure the M.2 SSD module to the card.
Figure 7. Installing M.2 SSD module on the BOSS-S1 card
a. module connector (2)
b. screw (2)
c. M.2 SSD module (2)
Figure 8. Installing the M.2 SSD module on the BOSS-S1 modular card
a. module connector
b. M.2 SSD module
Installing the BOSS-S1 card
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and
peripherals.
Deploying the BOSS-S1 card
17