Users Guide

Recommended Action : Update the Persistent Memory Passphrase to the correct passphrase or perform a Secure Erase
operation on the Dual inline memory module (DIMM). Secure erase, erases all persistent data.
● UEFI0357 : The Cryptographic Erase operation on the Intel Persistent Memory DIMM with serial number <serial number> in
slot <slot number> is successfully completed.
Recommended Action : N/A
● UEFI0358 : Unable to complete the Cryptographic Erase operation on the Intel Persistent Memory DIMM with serial number
<serial number> in slot <slot number>.
Recommended Action : Retry the operation. If the issue persists, contact your service provider.
● UEFI0359 : The Overwrite DIMM operation on the Intel Persistent Memory DIMM with serial number <serial number> in slot
<slot number> is successfully completed.
Recommended Action : N/A
NOTE: This is part of the PMem Sanitize function.
● UEFI0360 : Unable to complete the Overwrite DIMM operation on the Intel Persistent Memory DIMM with serial number
<serial number> in slot <slot number>.
Recommended Action : Retry the operation. If the issue persists, contact your service provider.
NOTE: This is part of the PMem Sanitize function.
● UEFI0361 : The Factory Default operation for the Intel Persistent Memory DIMMs in the system has completed successfully.
Recommended Action : N/A
● UEFI0362 : Unable to complete the Factory Default operation on the Intel Persistent Memory DIMMs. Recommended
Action : Retry the operation. If the issue persists, contact your service provider.
● UEFI0367 : The Create Goal operation on the Intel Persistent Memory DIMMs is successfully completed.
Recommended Action : N/A
● UEFI0368 : Unable to complete the Create Goal operation on the Intel Persistent Memory DIMMs. Recommended Action :
Retry the operation. If the issue persists, contact your service provider.
● UEFI0369 : The Complex Programmable Logic Device (CPLD) is successfully armed for the Asynchronous DRAM Refresh
(ADR) signal.
Recommended Action : N/A
● UEFI0370 : The Complex Programmable Logic Device (CPLD) cannot arm for the Asynchronous DRAM Refresh (ADR)
signal. It might be due to Intel Persistent Memory DIMMs failed to initialize.
Recommended Action : Reboot the system. If the issue persists, contact your service provider.
● UEFI0372 : The Remaining Rated Endurance value of the NVDIMM installed in the slot <slot number> is equal to 0%.
Recommended Action : Turn off the server and replace the NVDIMM immediately. For more information about the
Remaining Rated Endurance, see the product Installation and Service Manual available on the support site.
● UEFI0373 : The NVDIMM installed in slot <slot number> requires a maintenance. Recommended Action : Consider
replacing the DIMM during the next maintenance cycle. For more information about the NVDIMM Health Status, see the
product Installation and Service Manual available on the support site.
● UEFI0374 : The NVDIMM installed in slot <slot Number> is in critical condition. Recommended Action : Power off the
server and replace the NVDIMM immediately. For more information about the NVDIMM Health Status, see the product
Installation and Service Manual available on the support site.
● UEFI0375 : Unable to apply the Persistent Memory (PM) region configuration of the NVDIMM in the memory slot <slot
Number>.
Recommended Action : Verify the NVDIMM population configuration and retry the operation. For more information about
NVDIMMs, see the platform Installation and Service Manual available on the support site.
● UEFI0376 : All the NVDIMMs are disabled because the installed processor does not support the Intel Persistent Memory
DIMMs.
Recommended Action : Reconfigure the processor to support the Intel Persistent Memory DIMMs. For more information
about reconfiguring the processor, see the Installation and Service Manual of the system available on the support site.
● UEFI0377 : The Non-Volatile Dual In-Line memory module (NVDIMM) in the memory slot <slotNum> has encountered a
transient fatal failure during the previous boot.
Recommended Action : Remove and reinstall the Non-Volatile Dual In-line memory module (NVDIMM) device. If the issue
persists, contact your service provider. For more information about installation and removal, see the Installation and Service
Manual of the server available on the support site.
24
PMem event reporting