Users Guide
Table Of Contents
- Integrated Dell Remote Access Controller 9 User's Guide
- Contents
- iDRAC 概览
- 登录 iDRAC
- 强制更改密码 (FCP)
- 使用 OpenID Connect 登录 iDRAC
- 以本地用户、Active Directory 用户或 LDAP 用户身份登录 iDRAC
- 使用智能卡作为本地用户登录 iDRAC
- 使用单一登录登录 iDRAC
- 使用远程 RACADM 访问 iDRAC
- 使用本地 RACADM 访问 iDRAC
- 使用固件 RACADM 访问 iDRAC
- 简单的双重身份验证(简单 2FA)
- RSA SecurID 2FA
- 查看系统运行状况
- 使用公共密钥验证登录 iDRAC
- 多个 iDRAC 会话
- 安全默认密码
- 更改默认登录密码
- 启用或禁用默认密码警告消息
- 密码强度策略
- IP 阻止
- 使用 Web 界面启用或禁用 OS 到 iDRAC 直通
- 使用 RACADM 启用或禁用警报
- 设置受管系统
- 设置 iDRAC IP 地址
- 修改本地管理员帐户设置
- 设置受管系统位置
- 优化系统性能和功耗
- 设置管理站
- 配置支持的 Web 浏览器
- 更新设备固件
- 查看和管理分阶段更新
- 回滚设备固件
- 使用其他系统管理工具监测 iDRAC
- 支持服务器配置配置文件 — 导入和导出
- BIOS 设置或 F2 中的安全引导配置
- BIOS 恢复
- 配置 iDRAC
- 使用 OAuth 2.0 的委派授权
- 查看 iDRAC 和受管系统信息
- 设置 iDRAC 通信
- 配置用户帐户和权限
- 系统配置锁定模式
- 配置 iDRAC 以进行单一登录或智能卡登录
- 配置 iDRAC 以发送警报
- iDRAC 9 Group Manager
- 管理日志
- 在 iDRAC 中监测和管理电源
- iDRAC 直接更新
- 对网络设备执行资源清册、监测和配置操作
- 管理存储设备
- BIOS 设置
- 配置并使用虚拟控制台
- 使用 iDRAC 服务模块
- 使用 USB 端口进行服务器管理
- 使用 Quick Sync 2
- 管理虚拟介质
- 管理 vFlash SD 卡
- 使用 SMCLP
- 部署操作系统
- 使用 iDRAC 排除受管系统故障
- iDRAC 中的 SupportAssist 集成
- 常见问题
- 使用案例场景
○ GPU Target Temperature
○ Minimum GPU HW Slowdown Temperature
○ GPU Shutdown Temperature
○ Maximum Memory Operating temperature
○ Maximum GPU Operating Temperature
○ Thermal Alert State
○ Power Brake State
● Power Metrics:
○ Power Supply Status
○ Board Power Supply Status
● Telemetry — All GPU telemetry reports data
NOTE: GPU properties will not be listed for Embedded GPU cards and the Status is marked as Unknown.
GPU has to be in ready state before the command fetches the data. GPUStatus field in Inventory shows the availability of the
GPU and whether GPU device is responding or not. If the GPU status is ready, GPUStatus shows OK, otherwise the status
shows Unavailable.
The GPU offers multiple health parameters which can be pulled through the SMBPB interface of the NVIDIA controllers. This
feature is limited only to NVIDIA cards. Following are the health parameters retrieved from the GPU device:
● Power
● Temperature
● Thermal
NOTE:
This feature is only limited to NVIDIA cards. This information is not available for any other GPU that the server may
support. The interval for polling the GPU cards over the PBI is 5 seconds.
The host system must have the NVIDIA driver installed and running for the Power consumption, GPU target temperature,
Min GPU slowdown temperature, GPU shutdown temperature, Max memory operating temperature, and Max GPU operating
temperature features to be available. These values are shown as N/A if the GPU driver is not installed.
In Linux, when the card is unused, the driver down-trains the card and unloads in order to save power. In such cases, the
Power consumption, GPU target temperature, Min GPU slowdown temperature, GPU shutdown temperature, Max memory
operating temperature, Max memory operating temperature, and Max GPU operating temperature features are not available.
Persistent mode should be enabled for the device to avoid unload. You can use nvidia-smi tool to enable this using the command
nvidia-smi -pm 1.
You can generate GPU reports using Telemetry. For more information on telemetry feature, see 遥专流式专专 on page 193
NOTE:
In Racadm, You may see dummy GPU entries with empty values. This may happen if device is not ready to respond
when iDRAC queries the GPU device for the information. Perform iDRAC racrest operation to resolve this issue.
FPGA Monitoring
Field-programmable Gate Array (FPGA) devices needs real-time temperature sensor monitoring as it generates significant heat
when in use. Perform the following steps to get FPGA inventory information:
● Power off the server.
● Install FPGA device on the riser card.
● Power on the server.
● Wait until POST is complete.
● Login to iDRAC GUI.
● Navigate to System > Overview > Accelerators. You can see both GPU and FPGA sections.
● Expand the specific FPGA component to see the following sensor information:
○ Power consumption
○ Temperature details
NOTE: You must have iDRAC Login privilege to access FPGA information.
NOTE: Power consumption sensors are available only for the supported FPGA cards and is available only with Datacenter
license.
为看 iDRAC 和受管系为信息 113