Owners Manual
Table Of Contents
- Dell EMC PowerEdge MX840c Installation and Service Manual
- About this document
- Dell EMC PowerEdge MX840c overview
- Initial system setup and configuration
- Installing and removing sled components
- Safety instructions
- Before working inside your sled
- After working inside your sled
- Recommended tools
- PowerEdge MX840c sled
- Sled cover
- Air shroud
- Processor expansion module
- Drives
- Drive backplane
- Cable routing
- Drive cage
- Battery backup unit
- Control panel
- System memory
- Processors and heat sinks
- iDRAC card
- PERC cards
- Optional Internal dual SD module
- M.2 BOSS module
- Mezzanine card
- Optional internal USB memory key
- System battery
- System board
- Trusted Platform Module
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Dell EMC PowerEdge MX840c overview
The PowerEdge MX840c is a double-width compute sled and supports:
● Up to four Intel Xeon Scalable Processors
●
Up to 48 DIMM slots
● Up to eight 2.5 inch SAS, SATA (HDD/SSD), or NVMe drives
NOTE: All instances of SAS, SATA, NVMe hard drives, and SSDs are referred to as drives in this document, unless specified
otherwise.
Topics:
• Front view of the sled
• Inside the sled
• Locating the Service Tag of the sled
• System information label
2
Dell EMC PowerEdge MX840c overview 7