Reference Guide

ManualsBrandsDell ManualsC SeriesPowerEdge MX840c

Option Description

HTTP Device n

Settings (n = 1 to

Enables you to control the configuration of the HTTP device.

UEFI iSCSI

Settings

Enables you to control the configuration of the iSCSI device.

Table 1. UEFI iSCSI Settings screen details

Option Description

iSCSI Initiator Name Specifies the name of the iSCSI initiator in IQN

format.

iSCSI Device1 Enables or disables the iSCSI device. When

disabled, a UEFI boot option is created for the

iSCSI device automatically. This is set to

Disabled by default.

iSCSI Device1 Settings Enables you to control the configuration of the

iSCSI device.

TLS

Authentication

Configuration

View and/or modify this device's boot TLS authentication mode. None means the HTTP server and the

client will not authenticate each other for this boot. One way means the HTTP server will be

authenticated by the client, while the client will not be authenticated by the server. This option is set to

None by default.

Integrated Devices

You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video

controller, integrated RAID controller, and the USB ports.

Viewing Integrated Devices

To view the Integrated Devices screen, perform the following steps:

Steps

1. Power on or restart the system.

2. Press F2 immediately after you see the following message:

F2 = System Setup

NOTE:

If your operating system begins to load before you press F2, wait for the system to finish booting, and then

restart your system and try again.

3. On the System Setup Main Menu screen, click System BIOS.

4. On the System BIOS screen, click Integrated Devices.

Integrated Devices details

About this task

The Integrated Devices screen details are explained as follows:

Option

Description

User Accessible

USB Ports

Configures the user accessible USB ports. Selecting All Ports Off disables all USB ports; selecting All

Ports Off (Dynamic) disables all USB ports during POST and front ports can be enabled or disabled

dynamically by authorized user without resetting the system.

16 BIOS and UEFI