Dell™ PowerEdge™ R900 Systems Getting Started With Your System Guide de mise en route Primeiros passos com o sistema Procedimientos iniciales con el sistema
Dell™ PowerEdge™ R900 Systems Getting Started With Your System
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. Information in this document is subject to change without notice. © 2007 Dell Inc. All rights reserved.
System Features The major hardware and software features of your system include: • Two, or four Quad-Core Intel® Xeon® Processors 7300 Series. • Support for symmetric multiprocessing (SMP), which is available on systems with two or four Intel Xeon microprocessors. SMP greatly improves overall system performance by dividing microprocessor operations between independent microprocessors. To take advantage of this feature, you must use an operating system that supports multiprocessing.
• Four USB 2.0-compliant connectors (two on the front and two on the back) capable of external support for a diskette drive, a CD-ROM drive, a keyboard, a mouse, or a USB flash drive. • Optional remote access controller (Dell Remote Assistant Card or RAC) for remote systems management. • An integrated VGA-compatible video subsystem with an ATI ES1000, 33-MHz PCI video controller. This video subsystem contains a minimum of 16MB of graphics memory with support for 2D graphics.
Other Information You Might Need CAUTION: The Product Information Guide provides important safety and regulatory information. Warranty information may be included within this document or as a separate document. • The Rack Installation Guide or Rack Installation Instructions included with your rack solution describes how to install your system into a rack.
Installation and Configuration CAUTION: Before performing the following procedure, read and follow the safety instructions and important regulatory information in your Product Information Guide. This section describes the steps to set up your system for the first time. Unpacking the System Unpack your system and identify each item. Keep all shipping materials in case you need them later.
Installing the Rails and System in a Rack Once you have read the "Safety Instructions" located in the rack installation documentation for your system, install the rails and the system in the rack. See your rack installation documentation for instructions on installing your system in a rack.
Connecting the Keyboard, Mouse, and Monitor Connect the keyboard, mouse, and monitor (optional). The connectors on the back of your system have icons indicating which cable to plug into each connector. Be sure to tighten the screws (if any) on the monitor's cable connector.
Connecting the Power Connect the system’s power cable(s) to the system. Secure the cables with the provided straps. Plug the other end of the cable into a grounded electrical outlet or a separate power source such as an uninterrupted power supply (UPS) or a power distribution unit (PDU).
Turning the System On Press the power button on the system and the monitor (optional) to turn on the system. The power indicators should light. Adjust the monitor's controls until the displayed image is satisfactory. Complete the Operating System Setup If you purchased a preinstalled operating system, see the operating system documentation that ships with your system. To install an operating system for the first time, see the Quick Installation Guide.
Technical Specifications Processor Processor type Two or four Quad-Core Intel® Xeon® processor 7300 series Expansion Bus Bus type PCI Express Expansion slots Four x8 and three x4 Memory Architecture PC2-5200 667 MHz fully-buffered DIMMs with ECC protection and two-way lockstep operation Memory module sockets Thirty-two 240-pin Memory module capacities 512 MB, 1 GB, 2 GB, 4 GB Minimum RAM 2 GB Maximum RAM 128 GB Drives SAS hard drives Up to five 3.
Connectors Back NIC Four RJ-45 (for integrated 1-GB NICs) Serial 9-pin, DTE, 16550-compatible USB Two 4 pin, USB 2.0 compliant Video 15-pin VGA Front Video 15-pin VGA USB Two 4 pin, USB 2.
Physical Rack Height 6.8 inches (173 mm) Width 17.6 inches (447 mm) Depth 27.8 inches (706 mm) Weight (maximum configuration) 90 lbs (40 kg) Environmental NOTE: For additional information about environmental measurements for specific system configurations, see www.dell.com/environmental_datasheets. Temperature Operating 10 to 35°C (50 to 95°F) Storage -40 to 65°C (-40 to 149°F) Relative humidity Operating 20% to 80% Storage 5% to 95% Random vibration Operating 0.26 Grms Storage 1.
14 Getting Started With Your System
Systèmes Dell™ PowerEdge™ R900 Guide de mise en route
Remarques, avis et précautions REMARQUE : Une REMARQUE indique des informations importantes qui peuvent vous aider à mieux utiliser votre ordinateur. AVIS : Un AVIS vous avertit d'un risque de dommage matériel ou de perte de données et vous indique comment éviter le problème. PRÉCAUTION : Une PRÉCAUTION indique un risque potentiel d'endommagement du matériel, de blessure corporelle ou de mort. Les informations contenues dans ce document peuvent être modifiées sans préavis. © 2007 Dell Inc.
Caractéristiques du système Les principales caractéristiques du système sur le plan matériel et logiciel sont les suivantes : • Deux ou quatre processeurs Intel® Xeon® quadruple cœur de la série 7300. • Prise en charge du SMP (Symmetric Multiprocessing [Multi-traitement symétrique]), disponible sur les systèmes dotés de deux ou quatre microprocesseurs Intel Xeon. Le SMP améliore considérablement les performances du système en partageant les tâches entre des microprocesseurs indépendants.
• Carte de montage d'E/S avec quatre logements pour NIC Ethernet Gigabit prenant en charge des débits de 10, 100 et 1000 Mbps. • Logement PCI dédié pour contrôleur RAID intégré avec mémoire cache de 256 Mo et batterie RAID. REMARQUE : Le démarrage du système à partir d'un périphérique externe connecté à une carte SAS ou SCSI n'est pas pris en charge (cartes SAS 5/E et PERC 5/E incluses). Rendez-vous sur le site support.dell.
Systèmes d'exploitation pris en charge • Microsoft® Windows Server® 2003 • Microsoft Windows Server 2003 R2 avec SP2 • Red Hat® Enterprise Linux 4 (version 4.5) • Red Hat Enterprise Linux Server 5 • SUSE® Linux Enterprise Server 9 (x86_64) • SUSE Linux Enterprise Server 10 (x86_64) Autres informations utiles PRÉCAUTION : Le document Product Information Guide (Guide d'information sur le produit) contient d'importantes informations se rapportant à la sécurité et aux réglementations.
• Des mises à jour sont parfois fournies avec le système. Elles décrivent les modifications apportées au système, aux logiciels ou à la documentation. REMARQUE : Vérifiez toujours si des mises à jour sont disponibles sur le site support.dell.com et lisez-les en premier, car elles remplacent souvent les informations contenues dans les autres documents.
Déballage du système Sortez le système de son emballage et identifiez chaque élément. Conservez les matériaux d'emballage au cas où vous en auriez besoin ultérieurement.
Installation des rails et du système dans un rack Commencez par lire les consignes de sécurité qui se trouvent dans la documentation d'installation du rack, puis installez les rails et le système dans le rack. Consultez la documentation d'installation du rack pour obtenir les instructions appropriées.
Connexion du clavier, de la souris et du moniteur Connectez le clavier, la souris et le moniteur (en option). À l'arrière du système, des icônes indiquent quel câble doit être inséré dans chaque connecteur. N'oubliez pas de serrer les vis situées sur le connecteur du câble du moniteur, s'il en est équipé.
Connexion du câble d'alimentation Branchez le(s) câble(s) d'alimentation sur le système. Fixez les câbles à l'aide des attaches fournies. Branchez ensuite l'autre extrémité du câble sur une prise secteur mise à la terre ou sur une source d'alimentation autonome (onduleur ou unité de distribution de l'alimentation).
Mise sous tension du système Appuyez sur le bouton d'alimentation du système et sur celui du moniteur (en option). Les voyants d'alimentation doivent s'allumer. Réglez le moniteur jusqu'à ce que l'image soit correctement affichée.
Finalisation de l'installation du système d'exploitation Si vous avez acheté un système d'exploitation préinstallé, consultez tout d'abord la documentation associée fournie avec l'ordinateur. Si vous installez un système d'exploitation pour la première fois, consultez le document Quick Installation Guide (Guide d'installation rapide). Veillez à installer le système d'exploitation avant tout élément matériel ou logiciel acheté séparément.
Lecteurs Disques durs SAS Jusqu'à cinq lecteurs internes de 3,5 pouces enfichables à chaud, pouvant être supportés par le fond de panier (facultatif) ou Jusqu'à huit lecteurs internes de 2,5 pouces enfichables à chaud, pouvant être supportés par le fond de panier (facultatif) Lecteur optique Un lecteur slim IDE (DVD-ROM/CD-RW) ou SATA (DVD-ROM/CD-RW), selon disponibilité. REMARQUE : Les périphériques DVD sont uniquement des périphériques de données. Lecteur flash 4 broches, USB 2.
Vidéo Type de vidéo Contrôleur vidéo ATI ES1000, connecteur VGA Mémoire vidéo 16 Mo, SDRAM DDR Alimentation Bloc d'alimentation en CA (selon la tension en vigueur) Puissance (sortie) 1570 W (tension en entrée de 200/240 VCA) 1030 W (tension en entrée de 100/127 VCA) Tension (entrée) 90 - 140 VCA / 47 - 63 HZ 180 - 264 VCA / 47 - 63 HZ Dissipation d'énergie maximale 350 W Appel de courant maximal 55 A Piles et batteries Pile du système Pile bouton au lithium-ion CR2032 (3 V) Batterie RAID (en o
Environnement REMARQUE : Pour plus d'informations concernant les mesures d'exploitation liées à différentes configurations spécifiques, rendez-vous à l'adresse www.dell.com/environmental_datasheets.
30 Guide de mise en route
Sistemas Dell™ PowerEdge™ R900 Primeiros passos com o sistema
Notas, Avisos e Advertências NOTA: NOTA fornece informações importantes para ajudar você a usar melhor o computador. AVISO: AVISO indica possíveis danos ao hardware ou a possibilidade de perda de dados e ensina como evitar o problema. ADVERTÊNCIA: ADVERTÊNCIA indica um potencial de danos à propriedade, de lesões corporais ou até de morte. As informações contidas neste documento estão sujeitas a alterações sem aviso prévio. © 2007 Dell Inc. Todos os direitos reservados.
Recursos do sistema As principais características de hardware e software do sistema incluem: • Dois ou quatro processadores Intel® Xeon® Quad Core Série 7300. • Suporte para multiprocessamento simétrico (SMP), disponível nos sistemas com dois ou quatro microprocessadores Intel Xeon. O SMP melhora enormemente o desempenho geral do sistema dividindo as operações do microprocessador entre microprocessadores independentes.
• Slot PCI dedicado para uma placa controladora RAID com 256 MB de memória em cache e bateria RAID. NOTA: A inicialização do sistema não tem suporte de dispositivos externos conectados ao adaptador SAS ou SCSI, incluindo SAS 5/E ou PERC 5/E. Visite o site support.dell.com (em Inglês) para obter as informações de suporte mais recentes sobre a inicialização a partir de dispositivos externos. • Quatro conectores compatíveis com USB 2.
Sistemas operacionais compatíveis • Microsoft® Windows Server® 2003 • Microsoft Windows Server 2003 R2 com SP2 • Red Hat® Enterprise Linux4 (versão 4.5) • Red Hat Enterprise Linux Server 5 • SUSE® Linux Enterprise Server 9 (x86_64) • SUSE Linux Enterprise Server 10 (x86_64) Outras informações úteis ADVERTÊNCIA: O Guia de informações do produto fornece informações importantes sobre segurança e regulamentação.
• Às vezes, atualizações são fornecidas com o sistema para descrever mudanças que afetam o sistema, o software e/ou a documentação. NOTA: Verifique sempre as atualizações disponíveis no site support.dell.com (em inglês) e leia sempre as atualizações em primeiro lugar, pois estas geralmente substituem informações contidas em outros documentos.
Remoção do sistema da embalagem Remova o sistema da embalagem e identifique cada item. Guarde todos os materiais de envio caso sejam necessários mais tarde.
Instalação dos trilhos e do sistema no rack Depois de ler as instruções de segurança localizadas na documentação de instalação em rack para o sistema, instale os trilhos e o sistema no rack. Consulte o documento de instalação do rack para obter instruções sobre como instalar o seu sistema em um rack.
Conexão de teclado, mouse e monitor Conecte o teclado, o mouse e o monitor (opcional). Os conectores na parte de trás do sistema possuem ícones indicando quais os cabos devem ser ligados a cada conector. Certifique-se de apertar os parafusos (se houver) no conector do cabo do monitor.
Conexão da energia Conecte os cabos de alimentação ao sistema. Prenda os cabos com as correias fornecidas. Conecte a outra extremidade do cabo a uma tomada elétrica aterrada ou a uma fonte de energia separada como, por exemplo, uma UPS (Uninterrupted Power Supply [Fonte de alimentação contínua]) ou uma PDU (Power Distribution Unit [Unidade de distribuição de energia]).
Como ligar o sistema Pressione o botão liga/desliga do sistema e do monitor (opcional) para ligar o sistema. As luzes indicadoras de força deverão se acender. Ajuste os controles do monitor até que a imagem exibida seja satisfatória.
Conclusão da configuração do sistema operacional Caso tenha adquirido um sistema operacional pré-instalado, consulte a respectiva documentação fornecida com o sistema. Para instalar um sistema operacional pela primeira vez, consulte o Guia de instalação rápida. Certifique-se de que o sistema operacional esteja instalado antes de instalar qualquer hardware ou software que não tenha sido adquirido com o sistema.
Unidades Unidades de disco rígido SAS Até cinco unidades internas de 3,5 pol. com conexão automática (opcional) e com suporte a backplane ou Até oito unidades internas de 2,5 pol. com conexão automática (opcional) e com suporte a backplane Unidade óptica Uma unidade IDE de DVD-ROM/ CD-RW fina ou uma unidade SATA de DVD-ROM/CD-RW fina (quando disponível) NOTA: Os dispositivos de DVD destinam-se somente a dados. Unidade flash 4 pinos, compatível com USB 2.
Vídeo Tipo de vídeo Controlador de vídeo ATI ES1000; conector VGA Memória de vídeo 16 MB de DDR SDRAM Alimentação Fonte de alimentação CA (por fonte de alimentação) Potência (saída) 1570 W (entrada de 200/240 VCA) 1030 W (entrada de 100/127 VCA) Tensão (entrada) 90-140 VCA a 47-63 Hz 180-264 VCA a 47-63 Hz Dissipação máxima de energia 350 W Corrente de entrada máxima 55 A Baterias Bateria do sistema Célula tipo moeda, de íon de lítio, CR2032 de 3,0 V Bateria RAID (opcional) Íon de lítio de 3,
Requisitos ambientais NOTA: Para obter informações adicionais sobre os valores ambientais para configurações de sistema específicas, visite o site www.dell.com/environmental_datasheets (em Inglês).
46 Primeiros passos com o sistema
Sistemas Dell™ PowerEdge™ R900 Procedimientos iniciales con el sistema
Notas, avisos y precauciones NOTA: Una NOTA proporciona información importante que le ayudará a utilizar mejor el ordenador. AVISO: Un AVISO indica la posibilidad de daños en el hardware o la pérdida de datos, e informa de cómo evitar el problema. PRECAUCIÓN: Un mensaje de PRECAUCIÓN indica el riesgo de daños materiales, lesiones o incluso la muerte. La información contenida en este documento puede modificarse sin previo aviso. © 2007 Dell Inc. Todos los derechos reservados.
Componentes del sistema Los principales componentes de hardware y software del sistema son: • Dos o cuatro procesadores Intel® Xeon® de la serie 7300 de cuatro núcleos. • Compatibilidad con SMP (multiprocesamiento simétrico), que está disponible en sistemas con dos o cuatro microprocesadores Intel Xeon. SMP mejora en gran medida el rendimiento global del sistema al dividir las operaciones del microprocesador entre microprocesadores independientes.
• Cuatro módulos de ventilador, formados por dos ventiladores de dos rotores cada uno, para un total de ocho ventiladores de refrigeración. • Tres ranuras de expansión PCI Express x4 y cuatro ranuras de expansión PCI Express x8. • Una tarjeta vertical de E/S con cuatro NIC Ethernet Gigabit que admite velocidades de datos de 10 Mbps, 100 Mbps y 1 000 Mbps. • Una ranura PCI dedicada para una tarjeta controladora RAID integrada con 256 MB de memoria caché y una batería RAID.
• En el panel posterior se incluyen los conectores serie, de vídeo, dos conectores USB y cuatro conectores de NIC. • En el panel frontal se incluyen un conector de vídeo y dos conectores USB. • LCD de panel frontal 1x5 para la ID y los mensajes de error del sistema. Para obtener más información sobre componentes específicos, consulte “Especificaciones técnicas” en la página 58.
• Los CD que se facilitan con el sistema proporcionan documentación y herramientas para configurar y administrar el sistema. • Algunas veces, con el sistema se incluyen actualizaciones que describen los cambios realizados en el sistema, en el software o en la documentación. NOTA: Compruebe si hay actualizaciones en support.dell.com y, si las hay, léalas antes de proceder a la instalación, puesto que a menudo sustituyen la información contenida en otros documentos.
Desembalaje del sistema Desembale el sistema e identifique cada elemento. Guarde el material de embalaje por si lo necesita más adelante.
Instalación de los rieles y del sistema en un rack Después de leer las instrucciones de seguridad incluidas en la documentación del sistema relativa a la instalación del rack, instale los rieles y el sistema en el rack. Consulte la documentación de instalación del rack para obtener instrucciones sobre la instalación del sistema en un rack.
Conexión del teclado, el ratón y el monitor Conecte el teclado, el ratón y el monitor (opcional). Los conectores de la parte posterior del sistema cuentan con iconos que indican qué cable debe enchufarse en cada conector. Asegúrese de apretar los tornillos (si los hay) del conector del cable del monitor.
Conexión de la alimentación Conecte los cables de alimentación al sistema. Fije los cables con las tiras proporcionadas. Conecte el otro extremo del cable a una toma eléctrica con conexión a tierra o a otra fuente de energía, como por ejemplo un sistema de alimentación ininterrumpida (SAI) o una unidad de distribución de alimentación (PDU).
Encendido del sistema Para encender el sistema, presione el botón de encendido del sistema y del monitor (opcional). Los indicadores luminosos de alimentación deberían encenderse. Ajuste los controles del monitor hasta que la imagen mostrada sea satisfactoria.
Configuración del sistema operativo Si ha adquirido un sistema operativo preinstalado, consulte la documentación del sistema operativo que se suministra con el sistema. Para instalar un sistema operativo por primera vez, consulte la Guía de instalación rápida. Asegúrese de que el sistema operativo está instalado antes de instalar hardware o software no adquirido con el sistema.
Unidades Unidades de disco duro SAS Hasta cinco unidades internas de 3,5 pulgadas y acoplamiento activo (opcional) con compatibilidad con el plano posterior O bien: Hasta ocho unidades internas de 2,5 pulgadas y acoplamiento activo (opcional) con compatibilidad con el plano posterior Unidad óptica Una unidad de DVD-ROM/CD-RW IDE reducida o una unidad de DVD-ROM/CD-RW SATA reducida (si está disponible) NOTA: Los dispositivos de DVD son sólo de datos. Unidad flash 4 patas, compatible con USB 2.
Vídeo Tipo de vídeo Controladora de vídeo ATI ES1000; conector VGA Memoria de vídeo 16 MB de SDRAM DDR Alimentación Fuente de alimentación de CA (por fuente de alimentación) Potencia (salida) 1 570 W (entrada de 200/240 V CA) 1 030 W (entrada de 100/127 V CA) Voltaje (entrada) 90/140 V CA a 47/63 Hz 180/264 V CA a 47/63 Hz Disipación térmica máxima 350 W Corriente de conexión máxima 55 A Baterías Batería del sistema Batería de tipo botón de litio-ion de 3,0 V CR2032 Batería RAID (opcional) Li
Especificaciones ambientales NOTA: Para obtener información adicional sobre medidas ambientales relativas a configuraciones de sistema específicas, visite la página web www.dell.com/environmental_datasheets.
62 Procedimientos iniciales con el sistema