Manualshelf

Users Guide

ManualsBrandsDell ManualsC SeriesPowerEdge R230
301302303304305306307308309310
For more information on CMC RACADM commands, see the CMC RACADM Command Line Interface Reference Guide
available at dell.com/cmcmanuals.
For more information on iDRAC RACADM commands, see the iDRAC RACADM Command Line Interface Reference Guide
available at dell.com/idracmanuals.
● Using local RACADM
Use the command: racadm getsysinfo For example:
$ racadm getniccfg -m server-1
DHCP Enabled = 1
IP Address = 192.168.0.1
Subnet Mask = 255.255.255.0
Gateway = 192.168.0.1
● Using LCD:
On the main menu, highlight the server, press the check button, select the required server, and press the check button.
How to find the CMC IP address related to the blade server?
● From iDRAC web interface:
Go to Overview > iDRAC Settings > CMC. The CMC Summary page displays the CMC IP address.
● From the Virtual Console:
Select the "Dell CMC" console in the OSCAR to log in to CMC through a local serial connection. CMC RACADM commands
can be issued from this connection.
$ racadm getniccfg -m chassis
NIC Enabled = 1
DHCP Enabled = 1
Static IP Address = 192.168.0.120
Static Subnet Mask = 255.255.255.0
Static Gateway = 192.168.0.1
Current IP Address = 10.35.155.151
Current Subnet Mask = 255.255.255.0
Current Gateway = 10.35.155.1
Speed = Autonegotiate
Duplex = Autonegotiate
NOTE: You can also perform this using remote RACADM.
For more information on CMC RACADM commands, see the CMC RACADM Command Line Interface Reference Guide
available at dell.com/cmcmanuals.
For more information on iDRAC RACADM commands, see the iDRAC RACADM Command Line Interface Reference Guide
available at dell.com/idracmanuals.
How to find iDRAC IP address for rack and tower server?
● From iDRAC web Interface:
Go to Overview > Server > Properties > Summary. The System Summary page displays the iDRAC IP address.
● From Local RACADM:
Use the command racadm getsysinfo.
● From LCD:
On the physical server, use the LCD panel navigation buttons to view the iDRAC IP address. Go to Setup View > View >
iDRAC IP > IPv4 or IPv6 > IP.
● From OpenManage Server Administrator:
Frequently asked questions
305