Owners Manual

b. front bezel

System cover

Removing the system cover

Prerequisites

1. Ensure that you follow the Safety instructions.

2. Turn off the system, including any attached peripherals.

3. Disconnect the system from the electrical outlet and peripherals.

4. If installed, remove the front bezel.

Steps

1. Turn the latch release lock to the unlock position.

2. Lift the latch and rotate the latch toward the back of the system.

The system cover slides back, disengaging the tabs on the system cover from the slots on the chassis.

3. Hold the cover on both sides, and lift the cover away from the system.

Figure 13. Removing the system cover

a. latch release lock

b. latch

c. system cover

Next steps

Install the system cover.

Related tasks

Removing the optional front bezel

Installing the system cover

Installing and removing system components