Owners Manual

Figure 47. Removing a cooling fan

Next steps

1. Install the cooling fan.

2. Follow the procedure listed in the After working inside your system section.

Related tasks

Removing the cooling shroud

Installing a cooling fan

Installing the cooling shroud

Installing a cooling fan

Prerequisites

NOTE:

The procedure for installing each fan is identical.

1. Follow the safety guidelines listed in the Safety instructions section.

2. Follow the procedure listed in the Before working inside your system section.

3. Remove the cooling shroud.

4. If installed, remove the cooling fan blank.

Steps

1. Lower the fan into the cooling fan bracket.

2. Connect the power cable to the power cable connector on the system board.

Installing and removing system components