Owners Manual

Figure 48. Installing a cooling fan
Next steps
1. Install the cooling shroud.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Removing the cooling shroud
Installing the cooling shroud
Internal USB memory key (optional)
The USB memory key installed inside your system can be used as a boot device, security key, or mass storage device.
To boot from the USB memory key, configure the USB memory key with a boot image and then specify the USB memory key in the boot
sequence in System Setup.
The internal USB connector is located on the system board.
Related tasks
System board jumpers and connectors
Replacing the optional internal USB memory key
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
84
Installing and removing system components