Owners Manual

Steps

1. Lift and rotate the expansion card riser latch to open it.

2. Holding the touch points, lift the expansion card riser from the riser connector on the system board.

Figure 51. Removing and installing the expansion card riser

expansion card riser 2. touch point (2)

3. expansion card latch 4. guide slot on the chassis

5. riser connector on the system board 6. guide pin on the system board

7. guide slot on the expansion card riser

Next steps

1. Install the expansion card riser.

2. Follow the procedure listed in the After working inside your system section.

Related tasks

Removing an expansion card

Installing an expansion card

Installing the expansion card riser

Prerequisites

1. Follow the safety guidelines listed in the Safety instructions section.

2. Follow the procedure listed in the Before working inside your system section.

3. Install the expansion card into the expansion card riser.

Steps

1. Open the expansion card riser latch.

Installing and removing system components