Owners Manual

Figure 53. Removing the expansion card from the expansion card riser

1. touch point (2) 2. expansion card riser connector

3. expansion card riser 4. expansion card

Figure 54. Removing the expansion card from the expansion card riser

PERC card 2. expansion card connector on the riser

3. touch point (2) 4. expansion card riser

5. LED connector on the system board 6. LED cable

7. LED connector on the PERC card

Next steps

1. Install the expansion card.

2. Install the expansion card riser

3. Follow the procedure listed in the After working inside your system section.

Installing and removing system components