Owners Manual

Figure 56. Installing the expansion card in the expansion card riser

PERC card 2. expansion card connector on the riser

3. touch point (2) 4. expansion card riser

5. LED connector on the system board 6. LED cable

7. LED connector on the PERC card

Next steps

1. Install the expansion card riser.

2. Follow the procedure listed in the After working inside your system section.

Related tasks

Removing the expansion card riser

Installing the expansion card riser

SD vFlash card (optional)

An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the iDRAC port card. It provides persistent on-

demand local storage and a custom deployment environment that enables automation of server configuration, scripts, and imaging. It

emulates USB device(s). For more information, see the Integrated Dell Remote Access Controller User's Guide at

Dell.com/

idracmanuals.

Removing the optional SD vFlash card

Prerequisites

1. Follow the safety guidelines listed in the Safety instructions section.

2. Locate the SD vFlash card slot at the back of the chassis.

Steps

To remove the SD vFlash card, push the SD vFlash card inward to release it, and pull the SD vFlash card from the SD vFlash card slot.

Installing and removing system components