Owners Manual

Figure 60. Installing the iDRAC port card

screw 2. iDRAC port

3. iDRAC port card board 4. SD vFlash media card slot

5. tabs on the iDRAC port 6. slots on the chassis

7. iDRAC port card connector 8. iDRAC port card holder

Next steps

1. Install the cooling shroud.

2. If disconnected, reconnect the network cable.

3. Follow the procedure listed in the After working inside your system section.

Related tasks

Removing the cooling shroud

Installing the cooling shroud

Heat sink and processor

Removing the heat sink

Prerequisites

CAUTION:

Many repairs may only be done by a certified service technician. You should only perform troubleshooting and

simple repairs as authorized in your product documentation, or as directed by the online or telephone service and

support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow

the safety instructions that are shipped with your product.

Installing and removing system components 95