Users Guide

Table 44. SMCLP targets (continued)
Target Definitions
admin1/system1/sp1/rolesvc2/Role4
IPMI Serial Over LAN (SOL) role
admin1/system1/sp1/rolesvc3
CLP RBA Service
admin1/system1/sp1/rolesvc3/Role1-3
CLP role
admin1/system1/sp1/rolesvc3/Role1-3/
privilege1
CLP role privilege
Related concepts
Running SMCLP commands on page 255
Usage examples on page 260
Navigating the map address space
Objects that can be managed with SM-CLP are represented by targets arranged in a hierarchical space called the Manageability
Access Point (MAP) address space. An address path specifies the path from the root of the address space to an object in the
address space.
The root target is represented by a slash (/) or a backslash (\). It is the default starting point when you log in to iDRAC.
Navigate down from the root using the cd verb.
NOTE:
The slash (/) and backslash (\) are interchangeable in SM-CLP address paths. However, a backslash at the end of a
command line continues the command on the next line and is ignored when the command is parsed.
For example to navigate to the third record in the System Event Log (SEL), enter the following command:
->cd /admin1/system1/logs1/log1/record3
Enter the cd verb with no target to find your current location in the address space. The .. and . abbreviations work as they do
in Windows and Linux: .. refers to the parent level and . refers to the current level.
Using show verb
To learn more about a target use the show verb. This verb displays the target’s properties, sub-targets, associations, and a list
of the SM-CLP verbs that are allowed at that location.
Using the -display option
The show –display option allows you to limit the output of the command to one or more of properties, targets, associations,
and verbs. For example, to display just the properties and targets at the current location, use the following command:
show -display properties,targets
To list only certain properties, qualify them, as in the following command:
show –d properties=(userid,name) /admin1/system1/sp1/account1
If you only want to show one property, you can omit the parentheses.
Using SMCLP
259