Users Guide
Table Of Contents
- Dell Lifecycle Controller GUI v2.70.70.70 User's Guide
- Contents
- Introduction
- Using Lifecycle Controller
- Operating system deployment
- Monitor
- Hardware inventory view and export
- About view and export current inventory
- About view and export factory-shipped inventory
- Viewing hardware inventory — current or factory shipped
- Exporting hardware inventory — current or factory shipped
- Viewing or exporting hardware inventory after part replacement
- Viewing or exporting current inventory after resetting Lifecycle Controller
- Lifecycle Controller log
- Firmware update
- Configure
- System control panel access options
- Configuring iDRAC
- Configuring system time and date
- Configuring vFlash SD card
- Configuring RAID
- Configuring RAID using software RAID
- Creating a secure virtual disk on a RAID controller
- Key encryption
- Local key encryption mode
- Breaking mirrored drives
- System setup — Advanced Hardware Configuration
- Collect system inventory on restart
- Configuring local FTP server
- Configuring a local USB drive
- Configuring NFS and CIFS servers
- Conditions while configuring HTTP / HTTPS server
- Maintain
- Platform restore
- Backup server profile
- Export server profile
- Import server profile
- Import server license
- Part replacement configuration
- Repurpose or retire system
- Hardware diagnostics
- SupportAssist Collection
- Easy-to-use system component names
- Using the system setup and boot manager
- Troubleshooting and frequently asked questions
■ QLogic 57840S-K Quad Port 10Gb bNDC KR CNA
■ QLogic 57840S Quad Port 10GB rNDC SFP+/DA
■ QLogic Gigabit Network Adapter
■ QLogic Gigabit Network Adapter (PowerVault)
■ QLogic QLE2660 Single Port FC16 HBA
■ QLogic QLE2660 Single Port FC16 HBA (LP)
■ QLogic QLE2662 Dual Port FC16 HBA
■ QLogic QLE2662 Dual Port FC16 HBA (LP)
■ QLogic QME2662 Dual Port FC16 HBA Mezzanine
■ QLogic QLE2560 FC8 Single Channel HBA
■ QLogic QLE2562 FC8 Dual Channel HBA
■ QLogic FC8 Embedded Mezz Card QME2572
■ Emulex LPe16000 Single Port FC16 HBA
■ Emulex LPe16000 Single Port FC16 HBA (LP)
■ Emulex LPe16002 Dual Port FC16 HBA
■ Emulex LPe16002 Dual Port FC16 HBA (LP)
■ Emulex LPm16002 Dual Port FC16 HBA Mezzanine
RAID
● H310 Adapter
● H310 Mini Monolithic
● H310 Mini Blades
● H310 Embedded
● H330 Adapter
● H330 Mini Monolithic
● H330 Mini and Mono
● H330 Mini Blades
● H330 Embedded
● H710 Adapter
● H710 Mini Blades
● H710 Mini Monolithic
● H710P Adapter
● H710P Mini Blades
● H710P Mini Monolithic
● H810 Adapter
● H830 Adapter
● H730P Adapter
● PERC S110
● PERC S130
Integrated Broadcom NICs are controlled by both BIOS and the settings stored on the device itself. As a result, the Boot
Protocol field in the HII of integrated NICs has no effect; this setting is instead controlled by the BIOS on the Integrated
Devices screen.
To set integrated NICs to an iSCSI or PXE boot mode, select System BIOS Settings, and then select Integrated Devices. In
the list for each embedded NIC, select the appropriate value:
● Enabled for no boot capability.
● Enabled with PXE to use the NIC for PXE boot.
● Enabled with iSCSI to use the NIC to boot from an iSCSI target.
Modifying device settings
To modify device settings using the Advanced Hardware Configuration:
NOTE:
You can also modify the device settings by using the System Setup utility during startup. For more information
about the System Setup utility, see Using The System Setup Program And Boot Manager.
1. Start Lifecycle Controller. For more information, see Starting Lifecycle Controller.
2. In the left pane, select System Setup.
Configure
53