Owners Manual

iDRAC Direct LED indicator codes

The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.

NOTE: The iDRAC Direct LED indicator does not turn on when the USB port is used in the USB mode.

1. iDRAC Direct status indicator

The iDRAC Direct LED indicator table describes iDRAC Direct activity when configuring iDRAC Direct by using the management port (USB

XML Import).

Table 9. iDRAC Direct LED indicators

Convention iDRAC Direct LED

indicator pattern

Condition

A Green Turns green for a minimum of two seconds to indicate the start and end of a

file transfer.

B Flashing green Indicates file transfer or any operation tasks.

C Green and turns off Indicates that the file transfer is complete.

D Not lit Indicates that the USB is ready to be removed or that a task is complete.

The following table describes iDRAC Direct activity when configuring iDRAC Direct by using your laptop and cable (Laptop Connect):

Table 10. iDRAC Direct LED indicator patterns

iDRAC Direct LED indicator pattern Condition

Solid green for two seconds Indicates that the laptop is connected.

Flashing green (on for two seconds and

off for two seconds)

Indicates that the laptop connected is recognized.

Turns off Indicates that the laptop is unplugged.

Indicator codes for redundant power supply unit

Each AC power supply unit (PSU) has an illuminated translucent handle that indicates whether power is present or whether a power fault

has occurred.

About your system