Owners Manual

3. If removed, install the front bezel.

4. Reconnect the peripherals and connect the system to the electrical outlet.

5. Turn on the system, including any attached peripherals.

Related tasks

Installing the optional front bezel

Installing the system cover

Recommended tools

You need the following tools to perform the installation and removal procedures:

• Phillips #2 screwdriver

• Plastic scribe

• Wrist grounding strap connected to ground

Front bezel (optional)

The front bezel is attached to the front side of the system and prevents accidents while removing the hard drive or when pressing the

reset or power button. The front bezel can also be locked for additional security.

Removing the optional front bezel

Prerequisites

Follow the safety guidelines listed in the Safety instructions section.

Steps

1. Unlock the keylock at the left end of the bezel.

2. Lift the release latch next to the keylock.

3. Rotate the left end of the bezel away from the front panel.

4. Unhook the right end of the bezel and pull the bezel away from the system.

Figure 10. Removing the optional front bezel

a. bezel lock

b. front bezel

Installing and removing system components