Owners Manual

Figure 26. Removing a 3.5-inch hard drive blank
a. hard drive blank
b. release button
Next steps
If applicable, install the front bezel.
Installing a 3.5-inch hard drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. If installed, remove the front bezel.
Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 27. Installing a 3.5-inch hard drive blank
a. hard drive blank
Next steps
If applicable, install the front bezel.
Removing a 3.5-inch cabled hard drive carrier
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
66 Installing and removing system components