Setup Guide

Installation Guide 13

Figure 1-8. Securing the Riser 2 PCIe Card

NOTE: If the PCIe card on riser 2 is PERCHT810, install a battery strap to secure it to

the PCB.

1 PCIe card riser 2 2 PCIe card riser 2 connector

3 screws on metal bracket 4 metal bracket (DPN: FYGC8)

5 screw (DPN: JNG28) 6 electrical insulator tape on PCB (DPN: 0M4XF)

7 plastic block (DPN: FYGC8)