Users Guide
Table Of Contents
- Integrated Dell Remote Access Controller 9 User's Guide
- Contents
- iDRACの概要
- iDRAC へのログイン
- パスワードの強制変更(FCP)
- OpenID Connect を使用した iDRAC へのログイン
- ローカルユーザー、Active Directory ユーザー、または LDAP ユーザーとしての iDRAC へのログイン
- スマートカードを使用したローカルユーザーとしての iDRAC へのログイン
- シングルサインオンを使用した iDRAC へのログイン
- リモート RACADM を使用した iDRAC へのアクセス
- ローカル RACADM を使用した iDRAC へのアクセス
- ファームウェア RACADM を使用した iDRAC へのアクセス
- シンプルな2要素認証(シンプル2FA)
- RSA SecurID 2FA
- システム正常性の表示
- 公開キー認証を使用した iDRAC へのログイン
- 複数の iDRAC セッション
- セキュアなデフォルトパスワード
- デフォルト ログイン パスワードの変更
- デフォルトパスワード警告メッセージの有効化または無効化
- パスワード強度ポリシー
- IPブロック
- Webインターフェイスを使用したOS to iDRACパススルーの有効化または無効化
- RACADM を使用したアラートの有効化または無効化
- 管理下システムのセットアップ
- iDRAC IP アドレスのセットアップ
- ローカル管理者アカウント設定の変更
- 管理下システムの場所のセットアップ
- システムパフォーマンスと電力消費の最適化
- 管理ステーションのセットアップ
- 対応ウェブブラウザの設定
- デバイスファームウェアのアップデート
- ステージングされたアップデートの表示と管理
- デバイスファームウェアのロールバック
- 他のシステム管理ツールを使用した iDRAC の監視
- サーバ設定プロファイルのサポート - インポートおよびエクスポート
- BIOS 設定または F2 からのセキュアなブート設定
- BIOS recovery
- iDRAC の設定
- iDRAC 情報の表示
- ネットワーク設定の変更
- 暗号スイートの選択
- FIPS モード
- サービスの設定
- VNC クライアントを使用したリモートサーバーの管理
- 前面パネルディスプレイの設定
- タイムゾーンおよび NTP の設定
- 最初の起動デバイスの設定
- OS から iDRAC へのパススルーの有効化または無効化
- 証明書の取得
- RACADM を使用した複数の iDRAC の設定
- ホストシステムでの iDRAC 設定を変更するためのアクセスの無効化
- OAuth 2.0を使用した委任認証
- iDRAC と管理下システム情報の表示
- iDRAC 通信のセットアップ
- DB9 ケーブルを使用したシリアル接続による iDRAC との通信
- DB9 ケーブル使用中の RAC シリアルとシリアルコンソール間の切り替え
- IPMI SOL を使用した iDRAC との通信
- IPMI over LAN を使用した iDRAC との通信
- リモート RACADM の有効化または無効化
- ローカル RACADM の無効化
- 管理下システムでの IPMI の有効化
- RHEL 6 での起動中の Linux のシリアルコンソールの設定
- RHEL 7 でのシリアルターミナルの設定
- サポート対象の SSH 暗号スキーム
- ユーザーアカウントと権限の設定
- iDRAC ユーザーの役割と特権
- ユーザー名およびパスワードで推奨される文字
- ローカルユーザーの設定
- Active Directory ユーザーの設定
- iDRAC の Active Directory 認証を使用するための前提条件
- サポートされている Active Directory 認証メカニズム
- 標準スキーマ Active Directory の概要
- 標準スキーマ Active Directory の設定
- 拡張スキーマ Active Directory の概要
- 拡張スキーマ Active Directory の設定
- Active Directory 設定のテスト
- 汎用 LDAP ユーザーの設定
- システム設定ロックダウン モード
- シングルサインオンまたはスマートカードログインのための iDRAC の設定
- アラートを送信するための iDRAC の設定
- iDRAC 9グループ マネージャー
- ログの管理
- iDRACでの電源のモニタリングと管理
- iDRACダイレクト アップデート
- ネットワークデバイスのインベントリ、監視、および設定
- ネットワークデバイスのインベントリと監視
- FC HBA デバイスのインベントリと監視
- SFPトランシーバー デバイスのインベントリーと監視
- テレメトリー ストリーミング
- シリアル データ キャプチャ
- 仮想アドレス、イニシエータ、およびストレージターゲットのダイナミック設定
- ストレージデバイスの管理
- RAID の概念について
- 対応コントローラ
- 対応エンクロージャ
- ストレージデバイスの対応機能のサマリ
- ストレージデバイスのインベントリと監視
- ストレージデバイスのトポロジの表示
- 物理ディスクの管理
- 仮想ディスクの管理
- RAID設定機能
- コントローラの管理
- PCIe SSD の管理
- エンクロージャまたはバックプレーンの管理
- 設定を適用する操作モードの選択
- 保留中の操作の表示と適用
- ストレージデバイス — 操作適用のシナリオ
- コンポーネント LED の点滅または点滅解除
- ウォーム リブート
- BIOS 設定
- 仮想コンソールの設定と使用
- iDRAC サービスモジュールの使用
- サーバー管理用 USB ポートの使用
- Quick Sync 2の使用
- 仮想メディアの管理
- vFlash SD カードの管理
- SMCLP の使用
- オペレーティングシステムの導入
- iDRAC を使用した管理下システムのトラブルシューティング
- iDRAC への SupportAssist の統合
- よくあるお問い合わせ(FAQ)
- 使用事例シナリオ
- アクセスできない管理下システムのトラブルシューティング
- システム情報の取得とシステム正常性の評価
- アラートのセットアップと電子メールアラートの設定
- システムイベントログと Lifecycle ログの表示とエクスポート
- iDRAC ファームウェアをアップデートするためのインタフェース
- 正常なシャットダウンの実行
- 新しい管理者ユーザーアカウントの作成
- サーバのリモートコンソールの起動と USB ドライブのマウント
- 連結された仮想メディアとリモートファイル共有を使用したベアメタル OS のインストール
- ラック密度の管理
- 新しい電子ライセンスのインストール
- 一度のホストシステム再起動における複数ネットワークカードへの IO アイデンティティ構成設定の適用
5. 表示名: フィールドで、iDRAC と入力します。
6. 説明: フィールドで、Vendor Class と入力します。
7. ASCII: セクションをクリックして、iDRAC を入力します。
8. OK、終了 の順にクリックします。
9. DHCP ウィンドウで IPv4 を右クリックし、事前定義されたオプションの設定 を選択します。
10. オプションクラス ドロップダウンメニューから iDRAC(手順 4 で作成済み)を選択し、追加 をクリックします。
11. オプションタイプ ダイアログボックスで、次の情報を入力します。
● 名前 - iDRAC
● データタイプ - 文字列
● コード — 060
● 説明 - デルのベンダークラス識別子
12. OK をクリックして、DHCP ウィンドウに戻ります。
13. サーバー名下のすべての項目を展開し、スコープオプション を右クリックして、オプションの設定 を選択します。
14. 詳細設定 タブをクリックします。
15. ベンダークラス ドロップダウンメニューから iDRAC を選択します。060 iDRAC が、利用可能なオプション の列に表示
されます。
16. 060 iDRAC オプションを選択します。
17. DHCP 提供の標準 IP アドレスと共に、iDRAC に送信する必要がある文字列の値を入力します。文字列の値は、正しい
SCP ファイルをインポートするのに役立ちます。
オプションの データ入力、文字列の値 設定については、次の文字オプションと値のあるテキストパラメータを使用しま
す。
● Filename (–f) - エクスポートしたサーバ設定プロファイル(SCP)ファイルの名前を示します。
● Sharename (-n) - ネットワーク共有の名前を示します。
● ShareType (-s) -
NFS および CIFS ベースのファイル共有をサポートするほか、iDRAC ファームウェア 3.00.00.00 以降では、HTTP お
よび HTTPS を使用してプロファイルファイルへのアクセスもサポートされています。-s option フラグは、次のよ
うに更新されます。
-s (ShareType):NFS の場合は nfs または 0、CIFS の場合は cifs または 2、HTTP の場合は http または 5、
HTTPS の場合は https または 6 を入力します(必須)。
● IPAddress (-i) - ファイル共有の IP アドレスを示します。
メモ: Sharename (-n)、ShareType (-s)、および IPAddress (-i) は、渡す必要がある必須の属性で
す。-n は、HTTP または HTTPS には必要ありません。
● Username (-u) - ネットワーク共有にアクセスするために必要なユーザー名を示します。この情報は、CIFS にのみ
必要です。
● Password (-p) - ネットワーク共有にアクセスするために必要なパスワードを示します。この情報は、CIFS にのみ
必要です。
● ShutdownType (-d) - シャットダウンのモードを示します。0 は正常なシャットダウン、1 は強制シャットダウンを
示します。
メモ: デフォルト設定は 0 です。
● Timetowait (-t) - ホストシステムがシャットダウンするまで待機する時間を示します。デフォルト設定は 300 で
す。
● EndHostPowerState (-e) - ホストの電源状態を示します。0 はオフを、1 はオンを示します。デフォルトでは 1 に
設定されています。
メモ: ShutdownType (-d)、Timetowait (-t)、および EndHostPowerState (-e) は、オプションの属
性です。
NFS: -f system_config.xml -i 192.168.1.101 -n /nfs_share -s 0 -d 1
CIFS: -f system_config.xml -i 192.168.1.101 -n cifs_share -s 2 -u <USERNAME> -p <PASSWORD> -d 1 -t 400
HTTP: -f system_config.json -i 192.168.1.101 -s 5
HTTP: -f http_share/system_config.xml -i 192.168.1.101 -s http
HTTP: -f system_config.xml -i 192.168.1.101 -s http -n http_share
HTTPS: -f system_config.json -i 192.168.1.101 -s https
62
管理下システムのセットアップ