Owners Manual

Figure 34. Removing a cooling fan
1.
cooling fans (5) 2. cooling fan release tab
3. cooling fan cable connector 4. cooling fan connector on the system board
Next steps
1. If applicable, install the PCIe expansion card riser.
2. Reinstall the cooling shroud.
3. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 62
Related tasks
Before working inside your system on page 63
After working inside your system on page 63
Installing a cooling fan
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
94
Installing and removing system components