User Guide

Dell™ PowerEdge™ R610 Technical Guidebook
10
G. Side Views and Features
Rack installation components such as rails are provided with the PowerEdge R610 Rack Kit. The rack
installation components are as follows: sliding rack mount with latest generation Cable Management
Arm (CMA). The PowerEdge R610 will feature slam latches to oer easier removal from the rack. When
the system is installed in a rack, please observe the following guideline:
When the system is installed in a rack, only Dell-approved CMAs should be installed behind the chassis.
Rails
 •Enable the replacement of thumbscrews with slam latches on the chassis for easier stowing in
the rack.
 •Include the new, simple, and intuitive ReadyRail™ tool-less rack interface for square-hole and
round-hole racks.
 •Provide significantly improved compatibility with non-Dell racks.
 •Static rails for the R610 & R710 fit in all types of four-post and two-post racks available in the
industry including four-post threaded hole racks.
CMAs
 •Provide much larger vent pattern for improved airflow through the CMA.
 •Include a common support tray for eliminating CMA sag.
 •Replaced tie wraps with hook and loop straps to eliminate risk of cable damage during cycling.
 •Maintain key feature of being fully reversible with no conversion required.
H. Rails and Cable Management