Setup Guide
使用 Lifecycle Controller 设置 Dell EMC
PowerEdge 服务器
主题:
• 建议的额外支持
1. 打开 Lifecycle Controller。
a) 启动服务器,然后按 F10 以打开 Lifecycle Controller。
注: 如果错过了按 F10,则重新启动服务器并按 F10。
仅在首次打开 Lifecycle Controller 时才会显示初始设置向导。
2. 设置 Lifecycle Controller。
a) 选择语言和键盘类型,然后单击 Next。
b) 阅读产品概览,然后单击 Next。
c) 配置网络设置,并在应用设置后单击 Next。
d) 配置 iDRAC 网络设置和凭据,并在应用设置后单击 Next。
3. 验证应用的网络设置,然后单击 Finish 以退出初始设置向导。
注: 仅在首次打开 Lifecycle Controller 时才会显示初始设置向导。如果您想稍后进行配置更改,则重新启动服务器、按 F10
以打开 Lifecycle Controller,然后从 Lifecycle Controller 主页中选择 Settings 或 System Setup。
4. 更新固件。
a) 单击 Firmware Update > Launch Firmware Update,然后按照屏幕上的说明操作。
5. 部署操作系统。
a) 单击 OS Deployment > Deploy OS,然后按照屏幕上的说明操作。
有关部署操作系统的信息,请参阅“iDRAC and Lifecycle Controller User’s Guide”(iDRAC 和 Lifecycle Controller 用户指
南)的“部署操作系统”部分,网址:www.dell.com/idracmanuals。
有关 Lifecycle Controller 功能的视频,请转至 https://bit.ly/1Ne0Y7a。
建议的额外支持
• 确保操作系统部署完成。
• 找到 iDRAC 的密码 - 拉出系统正面的信息标签,以找到 iDRAC 默认密码。请记下此密码,因为您需要登录到 iDRAC。
注: 如果您选择了旧密码,则信息标签上的 iDRAC 默认密码将为空。
SupportAssist
1. 登录到 iDRAC 并单击 Maintenance > SupportAssist。
2. 按照 SupportAssist Registration 向导中的说明进行操作。
iDRAC Service Module
您可以使用 iDRAC Express 或 iDRAC Enterprise 安装 iDRAC Service Module。
从 iDRAC Express 安装 iDRAC Service Module
1. 从“iDRAC Settings”页面中,选择 iDRAC Service Module Setup 页面,单击 Install Service Module。
Rev. A00
2019 - 09
使用 Lifecycle Controller 设置 Dell EMC PowerEdge 服务器 1