Owners Manual
CAUTION: Do not lift the system board assembly by grasping a memory module, processor, or other components.
CAUTION: Take care not to damage the system identication button while placing the system board into the chassis.
3 Hold the touch points and lower the system board into the chassis.
4 Push the system board toward the back of the chassis until the board clicks into place.
5 Replace the following:
a cable retention bracket
b PCIe card holder
c integrated storage controller card
d internal USB key (if installed)
e internal dual SD module
f all expansion-card risers
g cooling-fan assembly
h cooling shroud
i power supply(s)
6 Reconnect all cables to the system board.
NOTE: Ensure that the cables inside the system are routed along the chassis wall and secured using the cable securing
bracket.
7 Close the system.
8 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
9 Import your new or existing iDRAC Enterprise license. For more information, see iDRAC7 User's Guide, at dell.com/support/manuals.
116
Installing System Components