Owners Manual

Opening The System
NOTE: It is recommended that you always use a static mat and static strap while working on components in the interior of the
system.
1 Turn o the system and attached peripherals, and disconnect the system from the electrical outlet.
2 Rotate the latch release lock counter clockwise to the unlocked position.
3 Lift the latch on top of the system and slide the cover back.
4 Grasp the cover on both sides, and carefully lift the cover away from the system.
Figure 13. Opening and Closing the System
1
system cover 2 latch
3 latch release lock
Closing The System
1 Lift the latch on the cover.
2 Place the cover onto the chassis and oset the cover slightly back so that it clears the chassis hooks and lays ush on the chassis.
3 Push down the latch to move the cover into the closed position.
4 Rotate the latch release lock in a clockwise direction to secure the cover.
5 Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
Installing System Components
37