Owners Manual
– System board support brackets
– Power cables for the GPU cards
– Filler brackets with closeout EMI shield for unoccupied PCI-e slots
• All GPU cards must be of the same type and model.
• Ensure that your system uses the redundant 1100 W power supplies.
• You can install up to two double-wide GPU cards.
NOTE: Two double-wide GPU cards conguration requires optional riser
3.
• You can install up to four single-wide GPU cards.
Installing A GPU Card
CAUTION: Many repairs may only be done by a certied service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1 Turn o the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
2 Open the system.
3 Unpack the GPU cards and the GPU enablement kit.
4 Attach the system board support bracket for the GPU card to the system chassis using the screw provided in the kit.
a screw
b system board support bracket
5 Remove the cooling shroud.
6 Remove the heat sinks.
7 Install the heat sinks from the kit and reinstall the cooling shroud.
Installing System Components
73