Owners Manual

Figure 71. Removing a processor and heat sink module (2U)
Figure 72. Removing a processor and heat sink module (1U)
Next steps
Install the processor and heat sink module.
Removing the processor from the processor and heat sink module
Prerequisites
NOTE:
Only remove the processor from the processor and heat sink module if you are replacing the processor or heat sink.
This procedure is not required when replacing a system board.
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the processor and heat sink module.
Steps
1. Place the heat sink with the processor side facing up.
88
Installing and removing system components