Owners Manual
Table Of Contents
- Dell EMC PowerEdge R740xd Installation and Service Manual
- Contents
- PowerEdge R740xd system overview
- Documentation resources
- Initial system setup and configuration
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Optional front bezel
- System cover
- Backplane cover
- Inside the system
- Air shroud
- Cooling fan assembly
- Cooling fans
- Intrusion switch
- NVDIMM-N battery
- Mid drive tray
- Mid drive tray details
- Removing mid drive tray
- Installing the mid drive tray
- Removing drive blank from drive carrier
- Installing drive blank into the drive carrier
- Removing drive carrier from the mid drive tray
- Installing drive carrier into mid drive tray
- Removing 3.5 inch drive from the drive carrier
- Installing 3.5 inch drive into the drive carrier
- Removing a 2.5 inch drive from the 3.5 inch mid drive carrier
- Installing a 2.5 inch drive into the 3.5 inch mid drive carrier
- Drives
- Drive guidelines
- Removing a drive blank
- Installing a drive blank
- Removing a drive carrier
- Installing a drive carrier
- Removing a 2.5 inch drive from the 3.5 inch drive adapter
- Installing a 2.5 inch drive into the 3.5 inch drive adapter
- Removing a 3.5 inch adapter from a 3.5 inch drive carrier
- Installing a 3.5 inch adapter into a 3.5 inch drive carrier
- Removing the drive from the drive carrier
- Installing a drive into the drive carrier
- Rear drive cage
- System memory
- Processors and heat sinks
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Opening and closing the PCIe card holder latch
- Removing expansion card from the expansion card riser
- Installing expansion card into the expansion card riser
- Removing riser 2 and 3 blank
- Installing riser 2 and 3 blank
- Removing riser 3 blank
- Installing riser 3 blank
- Removing expansion card riser 1
- Installing expansion card riser 1
- Removing expansion card riser 2
- Installing expansion card riser 2
- Removing expansion card riser 3
- Installing expansion card riser 3
- GPU or ACLR card installation guidelines
- Removing a GPU
- Installing a GPU
- M.2 SSD module
- Optional MicroSD or vFlash card
- Optional IDSDM or vFlash module
- Network daughter card
- Integrated storage controller card
- Backplane
- Backplane details
- Removing the backplane
- Installing the backplane
- Removing mid drive tray backplane
- Installing mid drive tray backplane
- Removing the 3.5 inch drive rear backplane
- Installing the 3.5 inch drive rear backplane
- Removing the 2.5 inch drive rear backplane
- Installing the 2.5 inch drive rear backplane
- Cable routing
- System battery
- Optional internal USB memory key
- Power supply units
- System board
- Trusted Platform Module
- Control panel
- System diagnostics
- Jumpers and connectors
- Getting help
Table 27. Riser configurations with greater than 4 PCIe slots [Riser configuration 3 (1A+2A),
4 (1A+2A+3A), Riser configuration 5 (1B+2A+3A), Riser configuration 6 (1D+2A+3A) and Riser
configuration 9 (1A+2D+3A), Riser configuration 15 (1A+2E+3B), Riser Configuration 16 (1D+2A+3A), and
Riser configuration 17 (1A+2F+3B)]
Card Type Slot priority Configuration Maximum number of cards
GPU (double width) 1, 8, 4 1A+2A+3A 3
1,8 1A+2D+3A 2
GPU (single width) 1, 8, 4 1D+2A+3A 3
NOTE: Factory install maximum of
3 x GPU cards in slots 1, 8, 4 with
x16 max PCIe width. Customers can
order 3 additional Custom Kits and
install in the order of slots 7, 2, 5,
however slots are limited to x8 max
PCIe width. This does not apply
to the NVIDIA A10 due to reduced
performance in x8 slots.
1, 8 1A+2D+3A 2
Nvidia A10 1, 8, 4 1D+2E+3B 3
1, 8 1A+2F+3B 2
Nvidia A30, A40,
A100
1, 8, 4 1A+2E+3B 3
1, 8 1A+2F+3B 2
ACLR 1, 8, 4 1A+2A+3A 3
1, 8, 4 1D+2A+3A 3
1, 8 1A+2D+3A 2
PCIe Bridge 1, 4, 8 1D+2A+3A 3
3, 4 1A+2D+3A 2
Internal storage
adapter
6, 5 all 1
200 G NIC 1 1A+2A+3A 1
1 1D+2A+3A 1
1 1A+2D+3A 1
HCA EDR 1, 8, 4, 3 1A+2A+3A 4
8,4 1B+2A+3A 2
1,8 1D+2A+3A 2
1,8 1A+2D+3A 2
100 G NIC 1, 8, 4, 3 for CX4/5 1A+2A+3A 4
1, 8 for CX6 1A+2A+3A 2
8, 4 for CX4/5 1A+2A+3A 2
8 for CX6 1B+2A+3A 1
1,8 1D+2A+3A 2
1,8 1A+2D+3A 2
100 G OPA 1, 8, 4, 3 1A+2A+3A 4
Installing and removing system components 97