Dell EMC Secured Component Verification – Referenzhandbuch für Server 10 2020 Rev.
Hinweise, Vorsichtshinweise und Warnungen ANMERKUNG: Eine ANMERKUNG macht auf wichtige Informationen aufmerksam, mit denen Sie Ihr Produkt besser einsetzen können. VORSICHT: Ein VORSICHTSHINWEIS warnt vor möglichen Beschädigungen der Hardware oder vor Datenverlust und zeigt, wie diese vermieden werden können. WARNUNG: Mit WARNUNG wird auf eine potenziell gefährliche Situation hingewiesen, die zu Sachschäden, Verletzungen oder zum Tod führen kann. © 2020 Dell Inc. oder ihre Tochtergesellschaften.
Inhaltsverzeichnis Kapitel 1: Übersicht......................................................................................................................... 4 Secured Component Verification.........................................................................................................................................4 Systemanforderungen...........................................................................................................................................................
1 Übersicht Dieser Abschnitt enthält eine Übersicht über Secured Component Verification (SCV) und die Systemanforderungen für die Ausführung der Anwendung auf dem System. Themen: • • Secured Component Verification Systemanforderungen Secured Component Verification Secured Component Verification (SCV) ist ein Überprüfungsangebot der Lieferkette, mit dem Sie überprüfen können, ob der PowerEdgeServer, den Sie erhalten haben, den Herstellungsspezifikationen im Werk entspricht.
Kategorie Anforderung ANMERKUNG: In den iDRAC-Tools ist SCV neben dem RACADM- und IPMI-Tool eine unabhängige Anwendung. iDRAC9-Version 4.32.10.00 und höher Softwareabhängigkeiten Python 2.7 und OpenSSL Erforderliche iDRAC-Lizenzen Secured Component Verification-Lizenz ANMERKUNG: Die Unterstützung für SCV wird nur mit der lokalen RACADM-Schnittstelle aktiviert.
2 Secured Component Verification auf WinPE In diesem Abschnitt finden Sie Informationen zu folgenden Themen: Themen: • • • • • Erstellen eines ISO-Images zum Ausführen von SCV mit WinPE Hinzufügen von SCV zu einem benutzerdefinierten ISO-Image Hinzufügen von RACADM zu einem ISO-Image Ausführen von SCV auf WinPE Überprüfen der SCV-Protokolle mit WinPE Erstellen eines ISO-Images zum Ausführen von SCV mit WinPE So erstellen Sie ein ISO-Image, um SCV mit WinPE auszuführen: 1.
5. Sobald das ISO-Image erfolgreich erstellt wurde, öffnen Sie den Ordner mit dem Namen „WINPE10.x-%timestamp%“, um das ISOImage zu finden. Abbildung 2. Bestätigung für das erfolgreich erstellte ISO-Image 6. Verwenden Sie dieses ISO-Image, um die SCV-Umgebung auf dem Server zu starten. Hinzufügen von SCV zu einem benutzerdefinierten ISOImage So fügen Sie SCV zu Ihrem benutzerdefinierten ISO-Image hinzu: 1. Laden Sie die iDRAC-Tools für Ihr System von der Seite Treiber & Downloads unter https://www.dell.
ANMERKUNG: Um die Dateien an einen bestimmten Speicherort zu extrahieren, klicken Sie auf Durchsuchen und wählen Sie den Ordner aus, in den die Dateien extrahiert werden sollen. Klicken Sie auf OK und dann auf Entpacken. 3. Kopieren Sie den Ordner RACADM in das Verzeichnis X:\Dell und legen Sie den Pfad für den Ordner mithilfe des Befehls set PATH=%PATH%;X:\Dell\Racadm fest. Ausführen von SCV auf WinPE 1. Melden Sie sich bei iDRAC auf dem System an, auf dem Sie die SCV-Anwendung ausführen möchten. 2.
Abbildung 5. Erwartete und erkannte Details für nicht übereinstimmende Komponente Überprüfen der SCV-Protokolle mit WinPE 1. Nach der Ausführung von SCV in WinPE werden die erstellten Protokolle unter X:\Dell\scv\scvapp\logs gespeichert. 2. Um die Protokolle zu überprüfen, navigieren Sie zum Protokollordner und verwenden Sie den Befehl notepad SCVLog_%servicetag%_%timestamp%.log. Abbildung 6.
3 Secured Component Verification auf Linux In diesem Abschnitt finden Sie Informationen zu folgenden Themen: Themen: • • Ausführen von SCV auf Linux Überprüfen der SCV-Protokolle mit Linux Ausführen von SCV auf Linux 1. Laden Sie die iDRAC-Tools für Ihr System von der Seite Treiber & Downloads unter https://www.dell.com/support herunter. 2.
Abbildung 8. Ausführen des SCV-Installationsskripts 4. Führen Sie nach der Installation von SCV den Befehl scv validateSystemInventory aus, um den Validierungsvorgang zu starten. ANMERKUNG: Verwenden Sie den Befehl scv help, um weitere Informationen über SCV und die Ausführung zu erhalten. 5. Nachdem das System die SCV-Anwendung erfolgreich ausgeführt hat, sollte das Ergebnis Validating System Inventory: Match angezeigt werden. Abbildung 9. Ausführen des Validierungsbefehls mit erfolgreichem Ergebnis 6.
Abbildung 11. Erwartete und erkannte Details für nicht übereinstimmende Komponente Überprüfen der SCV-Protokolle mit Linux 1. Nach der Ausführung von SCV in Linux werden die erstellten Protokolle unter scvapp\logs gespeichert. 2. Um die Protokolle zu überprüfen, navigieren Sie zum Protokollordner und verwenden Sie den Befehl vi SCVLog_%service-tag%_ %timestamp%.log. Abbildung 12.
4 Wie Sie Hilfe bekommen Themen: • • • Kontaktaufnahme mit Dell EMC Support-Dokumente und -Ressourcen Feedback zur Dokumentation Kontaktaufnahme mit Dell EMC Dell EMC bietet verschiedene Optionen für Online- und Telefonsupport an. Wenn Sie nicht mit dem Internet verbunden sind, finden Sie weitere Informationen auf Ihrer Bestellung, auf dem Lieferschein, auf der Rechnung oder im Dell Produktkatalog.