Owners Manual
Table Of Contents
- Dell EMC PowerEdge R7525 Installation and Service Manual
- Contents
- About this document
- System overview
- Initial system setup and configuration
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Cable routing
- RIO card
- Optional front bezel
- System cover
- Drive backplane cover
- Control panel
- Air shroud
- Cooling fan
- Side wall brackets
- Drives
- Drive backplane
- Rear drive cage
- Front PERC module
- System memory
- Processor and heat sink
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Removing the expansion card risers
- Installing the expansion card risers
- Removing expansion card from the expansion card riser
- Installing an expansion card into the expansion card riser
- Removing the full length expansion card risers
- Installing the full length expansion card risers
- Removing a GPU
- Installing a GPU
- Optional serial COM port
- Optional IDSDM module
- MicroSD card
- M.2 SSD module
- BOSS S2 card (optional)
- System battery
- Optional internal USB card
- Intrusion switch module
- Optional OCP card
- Power supply unit
- Trusted Platform Module
- System board
- LOM card and rear I/O board
- Upgrade Kits
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Table 27. Configuration 5-2: R1B+R2B+R3A+R4B (continued)
Agile description Supplier Category Card priority
CRD,CTL,FC16,HBA,SP,2690,
FH,V2
QLogic HBA: FC16 2100
CRD,CTL,FC16,HBA,SP,2690,
LP,V2
QLogic HBA: FC16 2200
CRD,CTL,FC16,HBA,DP,2692,
FH,V2
QLogic HBA: FC16 2300
CRD,CTL,FC16,HBA,DP,2692,
LP,V2
QLogic HBA: FC16 2400
CRD,NTWK,DP,10G,BT,QLG,V
2
QLogic NIC: 10Gb 2500
CRD,NTWK,DP,10G,BT,QLG,L
P,V2
QLogic NIC: 10Gb 2600
CRD,NTWK,QLGC,FH,10G,2P,
BT
QLogic NIC: 10Gb 3300
CRD,NTWK,QLGC,LP,10G,2P,
BT
QLogic NIC: 10Gb 3400
CRD,NTWK,QLGC,OCP3,25G,
2P,S28
QLogic OCP: 25Gb 5200
CRD,NTWK,QLGC,OCP3,10G,
2P,BT
QLogic OCP: 10Gb 6100
CRD,NTWK,QLGC,OCP3,10G,
2P,SF+
QLogic OCP: 10Gb 6200
CRD,NTWK,QLGC,OCP3,10G,
4P,BT
QLogic OCP: 10Gb 6600
CRD,NTWK,QLGC,OCP3,10G,
4P,SF+
QLogic OCP: 10Gb 6700
KIT,CRD,NVME,1.6,HHHL,PM
1725B
SAMSUNG PCIE SSD 8700
KIT,CRD,NVME,3.2,HHHL,PM
1725B
SAMSUNG PCIE SSD 8800
KIT,CRD,NVME,6.4,HHHL,PM
1725B
SAMSUNG PCIE SSD 8900
KIT,CRD,NVME,1.6,HHHL,PM
1735
SAMSUNG PCIE SSD 9000
KIT,CRD,NVME,1.6,HHHL,PM
1735,O
SAMSUNG PCIE SSD 9100
KIT,CRD,NVME,3.2,HHHL,PM
1735
SAMSUNG PCIE SSD 9200
KIT,CRD,NVME,3.2,HHHL,PM
1735,O
SAMSUNG PCIE SSD 9300
KIT,CRD,NVME,6.4,HHHL,PM
1735
SAMSUNG PCIE SSD 9400
KIT,CRD,NVME,6.4,HHHL,PM
1735,O
SAMSUNG PCIE SSD 9500
CRD,NTWK,SLFR,OCP3,25G,
2P,S28
SolarFlare OCP: 25Gb 5400
108 Installing and removing system components