Owners Manual
Table Of Contents
- Dell EMC PowerEdge R7525 Installation and Service Manual
- Contents
- About this document
- System overview
- Initial system setup and configuration
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Cable routing
- RIO card
- Optional front bezel
- System cover
- Drive backplane cover
- Control panel
- Air shroud
- Cooling fan
- Side wall brackets
- Drives
- Drive backplane
- Rear drive cage
- Front PERC module
- System memory
- Processor and heat sink
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Removing the expansion card risers
- Installing the expansion card risers
- Removing expansion card from the expansion card riser
- Installing an expansion card into the expansion card riser
- Removing the full length expansion card risers
- Installing the full length expansion card risers
- Removing a GPU
- Installing a GPU
- Optional serial COM port
- Optional IDSDM module
- MicroSD card
- M.2 SSD module
- BOSS S2 card (optional)
- System battery
- Optional internal USB card
- Intrusion switch module
- Optional OCP card
- Power supply unit
- Trusted Platform Module
- System board
- LOM card and rear I/O board
- Upgrade Kits
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Table 39. Configuration13-2: R1A+R2A+R3A (HL) (continued)
Agile description Supplier Category Card priority
CRD,NTWK,DP,25G,SFP,QLG
,LP,V2
QLogic NIC: 25Gb 4300
CRD,NTWK,QLGC,FH,25G,2P
,S28
QLogic NIC: 25Gb 5400
CRD,NTWK,QLGC,LP,25G,2P,
S28
QLogic NIC: 25Gb 5500
CRD,CTL,QLGC,FH,FC32,1P,S
28
QLogic HBA: FC32 6600
CRD,CTL,QLGC,LP,FC32,1P,S
28
QLogic HBA: FC32 6700
CRD,CTL,QLGC,FH,FC32,2P,
S28
QLogic HBA: FC32 6800
CRD,CTL,QLGC,LP,FC32,2P,
S28
QLogic HBA: FC32 6900
CRD,CTL,FC16,HBA,SP,2690,
FH,V2
QLogic HBA: FC16 7800
CRD,CTL,FC16,HBA,SP,2690,
LP,V2
QLogic HBA: FC16 7900
CRD,CTL,FC16,HBA,DP,2692,
FH,V2
QLogic HBA: FC16 8000
CRD,CTL,FC16,HBA,DP,2692,
LP,V2
QLogic HBA: FC16 8100
CRD,NTWK,QLGC,FH,10G,2P,
BT
QLogic NIC: 10Gb 9000
CRD,NTWK,QLGC,LP,10G,2P,
BT
QLogic NIC: 10Gb 9100
CRD,NTWK,QLGC,OCP3,25G,
2P,S28
QLogic OCP: 25Gb 10900
CRD,NTWK,QLGC,OCP3,10G,
2P,BT
QLogic OCP: 10Gb 11800
CRD,NTWK,QLGC,OCP3,10G,
2P,SF+
QLogic OCP: 10Gb 11900
CRD,NTWK,QLGC,OCP3,10G,
4P,BT
QLogic OCP: 10Gb 12300
CRD,NTWK,QLGC,OCP3,10G,
4P,SF+
QLogic OCP: 10Gb 12400
KIT,CRD,NVME,1.6,HHHL,PM
1725B
SAMSUNG PCIE SSD 14400
KIT,CRD,NVME,3.2,HHHL,PM
1725B
SAMSUNG PCIE SSD 14500
KIT,CRD,NVME,6.4,HHHL,PM
1725B
SAMSUNG PCIE SSD 14600
KIT,CRD,NVME,1.6,HHHL,PM
1735
SAMSUNG PCIE SSD 14700
KIT,CRD,NVME,1.6,HHHL,PM
1735,O
SAMSUNG PCIE SSD 14800
Installing and removing system components 151