Owners Manual
Table Of Contents
- Dell EMC PowerEdge R7525 Installation and Service Manual
- Contents
- About this document
- System overview
- Initial system setup and configuration
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Cable routing
- RIO card
- Optional front bezel
- System cover
- Drive backplane cover
- Control panel
- Air shroud
- Cooling fan
- Side wall brackets
- Drives
- Drive backplane
- Rear drive cage
- Front PERC module
- System memory
- Processor and heat sink
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Removing the expansion card risers
- Installing the expansion card risers
- Removing expansion card from the expansion card riser
- Installing an expansion card into the expansion card riser
- Removing the full length expansion card risers
- Installing the full length expansion card risers
- Removing a GPU
- Installing a GPU
- Optional serial COM port
- Optional IDSDM module
- MicroSD card
- M.2 SSD module
- BOSS S2 card (optional)
- System battery
- Optional internal USB card
- Intrusion switch module
- Optional OCP card
- Power supply unit
- Trusted Platform Module
- System board
- LOM card and rear I/O board
- Upgrade Kits
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Inside the system
Figure 11. Inside the system
1.
Handle 2. Riser 1 blank
3. Power supply unit (PSU 1) 4. BOSS S2 card slot
5. Riser 2 6. Heat sink for processor 1
7. Memory DIMM socket for processor 1 (E,F,G,H) 8. Cooling fan assembly
9. Service tag 10. Drive backplane
11. Cooling fan cage assembly 12. Memory DIMM socket for processor 2 (A,B,C,D)
13. Heat sink for processor 2 14. System board
15. Power supply unit (PSU 2) 16. Riser 3 blank
17. Riser 4 blank
16 System overview